ULTIMATEEXPERIMENTSCommodore 64 · Work in progress

Download and run Tiny 2.1 v0.6

Required hardware: a C64 Ultimate with 64 MHz turbo support and a 16 MB REU. Bring a USB drive.

Preparing the download button…

Open the live download page to use the button from GitHub.

Unzip the download. It contains PROBE.PRG, MODEL.REU, and this setup guide. MODEL.REU is the ready-to-load model image.

Set up the Ultimate

  1. Copy MODEL.REU and PROBE.PRG to any folder on the USB drive. Open the Ultimate menu and press F2 to check these settings.

    Ultimate menu Setting Value
    C64 and Cartridge Settings RAM Expansion Unit Enabled
    C64 and Cartridge Settings REU Size 16 MB
    U64 Specific Settings Turbo Control C64U Turbo Registers (called U64 Turbo Registers on some firmware)
  2. In the Ultimate file browser, select MODEL.REU, press RETURN, and choose Load into REU. Acknowledge the completion message.

  3. Select PROBE.PRG and choose Run. The startup screen should say Preloaded REU model verified. Type what is 7 times 8 and press RETURN. The expected answer is 7 times 8 is 56.

The program selects and checks 64 MHz at startup. You can run the PRG again while the same model remains in REU. Reload the model after powering off or using the REU for another program. Save any open work before running the PRG.

If startup fails

If the console asks you to load the model, go back to the Ultimate menu and select Load into REU for MODEL.REU, then run PROBE.PRG again. Keep the .REU extension so the file browser offers the correct action. The verified model file is 380,995 bytes with SHA-256 ba89630a6bb1fd2d385e6daeae6bbc27a919996703e12e4beb4ab06136f61a1b. The tested firmware was 3.14 with FPGA 121 and core 1.47.

Once the console returns to the question field, you can try what is the capital of peru without loading the model again. Use DEL to erase a character. Physical RUN/STOP cancellation and retry are in the future-version notes.

Original Tiny 2.1 for Pentium/486 DOS